April 2023

Engineer II – Transportation

Pape-Dawson Engineers

Pape-Dawson Engineers

  • San Antonio, TX

  • Permanent

  • Full-time

This position is responsible for providing advanced technical support in the development and design of road and highway projects.

Responsibilities

  • Assist a Project Manager in the development and design of road and highway projects to include plans, specifications, and estimates
  • Consult with Project Manager in the review of detailed plans, specifications, and estimate of cost to ensure conformity with the project scope and design standards
  • Develop feasible design alternatives and compare significant parameters such as typical sections, horizontal and vertical alignments, right-of-way requirements and cost
  • Identify and analyze the principle design features and major design alternatives that satisfy a project’s purpose and need
  • Review design details, and coordinate technical recommendations, assess the cost-effective constructibility of the project and generally evaluate the project
  • Produce detailed, final design plans, specifications and estimates in accordance with AASHTO, FHWA, TXDOT

Qualifications

Bachelor of Science degree in Agricultural, Architectural or Civil engineering from an accredited college or university

1-2 years experience in roadway planning and highway design

Working knowledge of Microstation

Effective communications skills; both oral and written

Ability to interact professionally with clients and all level of employees within an organization

Must be able to work Monday through Friday, 8 am to 5 pm, with occasional overtime as needed

Ability to work collaboratively in a team environment as well as independently

Preferred Qualifications

  • Registered as a Licensed Engineer In Training (E.I.T.)

Pape-Dawson Engineers is an Equal Opportunity/Affirmative Action employer

Pape-Dawson Engineers

  • Apply Now

Read More

Engineer II – Transportation

Pape-Dawson Engineers

Pape-Dawson Engineers

  • Houston, TX

  • Permanent

  • Full-time

This position is responsible for providing advanced technical support in the development and design of road and highway projects.

Responsibilities

  • Assist a Project Manager in the development and design of road and highway projects to include plans, specifications, and estimates
  • Consult with Project Manager in the review of detailed plans, specifications, and estimate of cost to ensure conformity with the project scope and design standards
  • Develop feasible design alternatives and compare significant parameters such as typical sections, horizontal and vertical alignments, right-of-way requirements and cost
  • Identify and analyze the principle design features and major design alternatives that satisfy a project’s purpose and need
  • Review design details, and coordinate technical recommendations, assess the cost-effective constructibility of the project and generally evaluate the project
  • Produce detailed, final design plans, specifications and estimates in accordance with AASHTO, FHWA, TXDOT

Qualifications

Bachelor of Science degree in Agricultural, Architectural or Civil engineering from an accredited college or university

1-2 years experience in roadway planning and highway design

Working knowledge of Microstation

Effective communications skills; both oral and written

Ability to interact professionally with clients and all level of employees within an organization

Must be able to work Monday through Friday, 8 am to 5 pm, with occasional overtime as needed

Ability to work collaboratively in a team environment as well as independently

Preferred Qualifications

  • Registered as a Licensed Engineer In Training (E.I.T.)

Pape-Dawson Engineers is an Equal Opportunity/Affirmative Action employer

Pape-Dawson Engineers

  • Apply Now

Read More

Engineer II – Transportation

This position is responsible for providing advanced technical support in the development and design of road and highway projects.

Responsibilities

  • Assist a Project Manager in the development and design of road and highway projects to include plans, specifications, and estimates
  • Consult with Project Manager in the review of detailed plans, specifications, and estimate of cost to ensure conformity with the project scope and design standards
  • Develop feasible design alternatives and compare significant parameters such as typical sections, horizontal and vertical alignments, right-of-way requirements and cost
  • Identify and analyze the principle design features and major design alternatives that satisfy a project’s purpose and need
  • Review design details, and coordinate technical recommendations, assess the cost-effective constructibility of the project and generally evaluate the project
  • Produce detailed, final design plans, specifications and estimates in accordance with AASHTO, FHWA, TXDOT

Qualifications

Bachelor of Science degree in Agricultural, Architectural or Civil engineering from an accredited college or university

1-2 years experience in roadway planning and highway design

Working knowledge of Microstation

Effective communications skills; both oral and written

Ability to interact professionally with clients and all level of employees within an organization

Must be able to work Monday through Friday, 8 am to 5 pm, with occasional overtime as needed

Ability to work collaboratively in a team environment as well as independently

Preferred Qualifications

  • Registered as a Licensed Engineer In Training (E.I.T.)

Pape-Dawson Engineers is an Equal Opportunity/Affirmative Action employer

Pape-Dawson Engineers

Read More

Engineer I – Transportation

Pape-Dawson Engineers

Pape-Dawson Engineers

  • San Antonio, TX

  • Training

  • Full-time

Under the guidance of a licensed professional engineer (P.E.) and as a member of an engineering project team, this position will provide technical support in the development and design of road and highway projects. Your technical experience will be enhanced by your engagement in the activities and experiences planned for you – it’s the Pape-Dawson Way!

Responsibilities

Here is what you can expect as your tasks and duties in this role:

  • Assist a Project Manager in the development and design of road and highway projects to include plans, specifications, and estimates
  • Consult with Project Manager in the review of detailed plans, specifications, and estimate of cost to ensure conformity with the project scope and design standards
  • Develop feasible design alternatives and compare significant parameters such as typical sections, horizontal and vertical alignments, right-of-way requirements and cost
  • Identify and analyze the principle design features and major design alternatives that satisfy a project’s purpose and need
  • Review design details, and coordinate technical recommendations, assess the cost-effective constructability of the project and generally evaluate the project
  • Produce detailed, final design plans, specifications and estimates in accordance with AASHTO, FHWA, TXDOT
  • Be present and willing to learn from anyone and everyone
  • Be active in our Pape-Dawson activities- we have lots of fun while serving each other, our community and clients!

Qualifications

Here is a short list of what is necessary to perform effectively in this role:

  • Bachelor of Science degree in civil engineering from an ABET accredited college or university; other degrees considered are agricultural, transportation and environmental engineering
  • Internship experience in roadway planning and highway design preferred, but certainly not required
  • Eagerness to learn how to practically apply knowledge obtain from engineering degree coursework
  • Basic knowledge of software used in Transportation design such as Microstation, is helpful but not expected. Use of the varying software will be obtained in the work environment
  • Effective communications skills, both oral and written, for team collaboration and interpersonal relationships developed with clients and agency representatives
  • Ability to interact professionally with clients and all level of employees within an organization
  • Must be able to work Monday through Friday, 8 am to 5 pm with occasional overtime- sometimes you just have to be willing to work together and get the job done outside the normal business day
  • Must be reliable and dependable- your team will be counting on you!

Pape-Dawson Engineers is an Equal Opportunity/Affirmative Action employer

Pape-Dawson Engineers

  • Apply Now

Read More

Engineer IV – Transportation

Pape-Dawson Engineers

Pape-Dawson Engineers

  • Houston, TX

  • Permanent

  • Full-time

This position is responsible for providing advanced technical support in the development and design of road and highway projects.

Responsibilities

  • Assist a Project Manager in the development and design of road and highway projects to include plans, specifications, and estimates
  • Consult with Project Manager in the review of detailed plans, specifications, and estimate of cost to ensure conformity with the project scope and design standards
  • Develop feasible design alternatives and compare significant parameters such as typical sections, horizontal and vertical alignments, right-of-way requirements and cost
  • Identify and analyze the principle design features and major design alternatives that satisfy a project’s purpose and need
  • Review design details, and coordinate technical recommendations, assess the cost-effective conductibility of the project and generally evaluate the project
  • Produce detailed, final design plans, specifications and estimates in accordance with AASHTO, FHWA, TXDOT

Qualifications

Bachelor of Science degree in civil or agricultural engineering from an ABET accredited college or university

4 years’ multi-discipline experience in roadway design and PS&E * Familiar with engineering principles, techniques, and procedures

Working knowledge of Microstation

Effective communications skills; both oral and written

Ability to interact professionally with clients and all level of employees within an organization

Must be able to work Monday through Friday, 8 am to 5 pm, with occasional overtime as needed

Ability to work collaboratively in a team environment as well as independently

Preferred Qualifications

  • Registered as a Licensed Engineer In Training (E.I.T.)

Pape-Dawson Engineers is an Equal Opportunity/Affirmative Action employer

Pape-Dawson Engineers

  • Apply Now

Read More

Project Water Resources Engineer or Scientist

Geosyntec Consultants

Geosyntec Consultants

  • Raleigh, NC

  • Permanent

  • Full-time

If you re looking for a place to grow your career, where you can contribute to a dynamic innovative firm, tackle challenging project work, and collaborate with industry recognized professionals – Geosyntec is the place for you! As an Project Water Resources Engineer or Scientist in Raleigh, North Carolina, you will work on complex projects including dam and levee breach analysis, inundation studies, and downstream consequences estimation to support dam safety risk assessments, innovative urban stormwater management and natural surface water systems, sustainable green infrastructure planning studies, urban stormwater infrastructure design and infrastructure, flood mitigation practices, stream restoration, and surface water, watershed, and stormwater runoff monitoring.

Our clients ask us to address their new ventures and most challenging problems involving the environment, natural resources, and civil infrastructure. Ranked by ENR in the top 20 design firms for the environment, Geosyntec is internationally known for its technical leadership, broad experience, and exceptional client service. Learn more by visiting

ESSENTIAL DUTIES AND RESPONSIBILITIES

  • Applying innovative hydrologic, hydraulic, and water quality modeling software;
  • Perform dam and levee breach analysis and inundation studies;
  • Developing innovative green infrastructure solutions for the urban environment;
  • Floodplain mapping and flood protection designs;
  • In-stream and urban stormwater water quality monitoring and modeling;
  • Developing construction documents, including engineering drawings and technical specifications;
  • Interacting with client representatives;
  • Task and project-level responsibility for scoping, performing, managing, and delivering multiple concurrent project assignments;
  • Consistent with our sell-manage-do business model, play a role supporting lead generation, business development, staff development, and mentoring; and
  • Help broaden our reputation via publishing and visibility at prominent industry conferences.

Collaboration and mentoring are cornerstones of Geosyntec s culture. You should expect to work closely with experienced professionals who will help integrate you into Geosyntec s culture as you advance to this next stage of your career. Based on your current level of experience, you may be asked to take on task-level or project management responsibilities, along with business development, and staff mentoring tasks.

Here are some other things you should know about a typical practitioner position with Geosyntec:

  • Training: This position requires OSHA health and safety, boater certification, defensive driving certification, first aid, and CPR training and medical monitoring, paid for by the firm. We also offer professional development opportunities including in-house seminars, webinars, and mentoring, that allow our professionals to build the technical and business skills necessary to become successful consultants.
  • Fieldwork: Up to 5%
  • Overnight travel: Up to 10%

Your success is our success. We encourage our professionals to continually develop their interests and skills. Advancement is based on an individual s own performance and initiative.

EDUCATION AND LICENSURE

  • Bachelor’s degree in agricultural, biological, civil, or environmental engineering with emphasis on water resources or closely related discipline. (required)
  • Advanced degree in agricultural, biological, civil, or environmental engineering with emphasis on water resources or closely related discipline. (preferred)
  • Professional registration (i.e., P.E., P.G.). (required)

SKILLS, EXPERIENCE AND QUALIFICATIONS

  • At least 7 years of research or related experience, or equivalent combination of education and experience. (required)
  • Experience with modeling and design software tools such as EPA-SWMM, HEC-HMS, HEC-RAS, AutoCAD, and ArcGIS. (preferred)
  • Ability to work both independently and in a team environment to perform problem-solving and develop innovative solutions to meet project needs. (required)
  • Exceptional social skills and outstanding oral and written communication skills. (required)
  • Valid U.S. driver s license and a satisfactory driving record for business travel. (required)

CULTURE/EEO STATEMENT

Geosyntec strives to hire and retain the best and brightest people in their fields. We look for exceptional interpersonal skills, communication skills, and problem-solving abilities, plus the passion for technical excellence and quality. We seek individuals with leadership potential, a commitment to lifelong learning and growth, and the desire to build a long and rewarding career with a growing Firm.

Geosyntec is a great place to build a career. If you’re looking for an exciting place to work, a place with challenging and rewarding projects, and a place that has been nationally recognized for its employees’ quality of life, technical expertise, and business success, then Geosyntec may be the place for you. You can learn more about careers and employment at Geosyntec by visiting

We are proud to offer our employees a highly competitive benefits package. Learn more by visiting

Geosyntec Consultants

  • Apply Now

Read More

Product Engineer

John Deere

John Deere

  • East Moline, IL

  • Permanent

  • Full-time

There are over 7 billion people on this planet. And by 2050, there will be 2 billion more… many moving into urban centers at an unprecedented rate. Making sure there is enough food, fiber and infrastructure for our rapidly growing world is what we’re all about at John Deere. And it’s why we’re investing in our people and our technology like never before! Here the world’s brightest minds are tackling the world’s biggest challenges. If you believe one person can make the world a better place, we’ll put you to work. RIGHT NOW.

John Deere is an equal opportunity employer. All qualified applicants will receive consideration for employment without regards to, among other things, race, religion, color, national origin, sex, age, sexual orientation, gender identity or expression, status as a protected veteran, or status as a qualified individual with disability.

Primary Location: United States (US) – Illinois – East Moline

Function: Engineering (CA)

Title: Product Engineer – 98125

Onsite/Remote:Onsite Position

This position is eligible for a flexible work schedule arrangement at the present time. The arrangement may be delayed for training or other job acclimation purposes and remains subject to change.

Your Responsibilities

As an Engineer, Partnering for John Deere World Headquarters located in East Moline, IL, you will…

  • Lead adoption of partnered product; align product specification, John Deere component adoption, and branding.
  • Evaluate and mitigate risk around John Deere process, product life, serviceability, product safety to meet customer needs.
  • Onboarding with partner product and service part adoption
  • Lifecycle management for product improvements, quality issues, and warranty tracking

Visa Sponsorship is NOT available for this position

What Skills You Need

  • 3 or more years of experience in product design and testing or Continuous Improvement (CI) process execution.
  • Strong communication skills
  • Strong and demonstrated problem-solving skills
  • Ability and experience working in a self-directed mode
  • Ability to travel up to 25% domestically, based on business needs
  • Understanding of agricultural practices, John Deere and competitive equipment, and customer requirements

What Makes You Stand Out

  • Experience working with cross functional teams
  • Experience with John Deere business processes (i.e. SAP, PDMLink)
  • Experience with Row Crop Planters, Air Seeding, or tillage equipment
  • Diverse experience in other areas of product development such as Product Verification and Validation (PV&V), Product Design, Quality, Manufacturing, Analysis, etc
  • Understanding and managing risk

Education

Ideally you will have a degree or equivalent related work experience in the following:

  • Bachelor’s Degree in Engineering

What You’ll Get

At John Deere, you are empowered to create a career that will take you to where you want to go while working in an inclusive team environment. Here, you’ll enjoy the freedom to explore new projects, the support to think outside the box and the advanced tools and technology that foster innovation and achievement. Additionally, we offer a comprehensive reward package to help you get started on your new career path, including:

  • Flexible work arrangements
  • Highly competitive base pay and performance bonuses
  • Savings & Retirement benefits (401K and Defined Benefit Pension)
  • Healthcare benefits with a generous company contribution in the Health Savings Account
  • Adoption assistance
  • Employee Assistance Programs
  • Tuition assistance
  • Fitness subsidies and on-site gyms at specific Deere locations
  • Charitable contribution match
  • Employee Purchase Plan & numerous discount programs for personal use

Follow this link to learn more about our Total Rewards Package

The information contained herein is not intended to be an exhaustive list of all responsibilities and qualifications required of individuals performing the job. The qualifications detailed in this job description are not considered the minimum requirements necessary to perform the job, but rather as guidelines.

The terms of the applicable benefit plans, and all company actions administering or interpreting these plans, continue to control. Deere & Company reserves the right to suspend, amend, modify, or terminate the Plan(s) in any manner at any time, including the right to modify or eliminate any cost-sharing between the company and participants. Changes, which can be made at any time, are made by action of the company’s board of directors, or to the extent authorized by resolution of its board of directors, or by the Deere & Company Compensation Committee. In the event of a conflict between the language of the official Plan Documents and this document, the language of the official Plan Documents will control.

ACA Section 1557 Nondiscrimination Notice

The John Deere Health Benefit Plans for Salaried Employees and The John Deere Benefit Plan for Wage Employees comply with applicable Federal civil rights laws and do not discriminate on the basis of race, color, national origin, age, disability, or sex.

John Deere

  • Apply Now

Read More

Senior Software Engineer

Overview:

TekWissen Group is a workforce management provider throughout the USA and many other countries in the world. Our client is the brand name of Deere & Company, an American corporation that manufactures agricultural machinery, heavy equipment, forestry machinery, diesel engines, drivetrains used in heavy equipment, and lawn care equipment.

Position: Senior Software Engineer

Location: Johnston,IA,50131

Duration: 17 Months

Job Type: Contract

Work Type:Remote

JOB Description:

MAJOR PURPOSE:

Works on a product team and supports product design by planning its work, coordinating with others, and writing and testing code to deliver functionality for the complete product or products it supports.

This level designs complex/significant parts of a system/sub-system or works on a complete product of a broad scope and solves well-defined problems with little guidance.

May act as a work lead, providing technical coaching to other engineers and support personnel; Recognized as an expert user of critical technology; develops new software functionality for product development.

MAJOR DUTIES:

Description of the major duties performed in this job.

Develops, codes, configures, and tests programs and systems.

Evaluates and implements enhancement design solutions to improve cost,quality, and performance of software applications.

Analyzes assignments and determines software specifications that must be fulfilled to achieve objectives.

Executes necessary documentation, as directed, or needed.

Collaborates with other relevant stakeholders and team members to ensure that features meet business needs.

Follows industry-standard agile software design methodology for development and documentation.

Mentors junior software engineers on the team.

QUALIFICATIONS:

Competencies, technical skills, formal education and relevant work experience critical for successful individual performance of essential functions.

Competencies and target level:

The leadership level of the job determines competencies in the client Competency Model.

Resources can be found in the Talent Central Self Service Portal.

Technical Skills & Knowledge:

Specialized skills, knowledge and abilities needed to perform the essential functions of the job.

Excellence in verbal and written communication forms with emphasis on persuasive communication, tact and negotiation. (Performs more complex functions, understands principles, may teach others.)

Ability to analyze, translate, and define business requirements into technical solutions. (Performs more complex functions, understands principles, may teach others.)

Ability to apply engineering principles and concepts for designs. (Performs more complex functions, understands principles, may teach others.)

Ability to manage many competing priorities/requests in a fast-paced environment (Performs more complex functions, understands principles, may teach others.)

Education:

Formal education or training required to perform the essential functions of the job. Includes degrees, certifications, licenses and/or registration requirements.

Degree in an Engineering/Technology discipline or equivalent experience.

(University Degree (4 years or equivalent))

Degree in an Information Technology discipline or equivalent experience.

(University Degree (4 years or equivalent))

Relevant work experiences:

Type and amount of experience necessary to perform the essential functions of the job. May include specific roles and/or an understanding of a particular function, organization, industry or product line.

Product design, test and/or analysis experience. (4 – 7 years)

Previous experience in programming/software development. (4 – 7 years)

Software development processes experience. (4 – 7 years)

Participating in Agile Development (4 – 7 years)

Experience working in an Agile Environment (4 – 7 years)

Top Must Haves:

Experience in software development using Java with Spring and RESTful APIs (7+ years)

Experience with AWS services and cloud development (3+ years)

Experience with Test Driven Development across multiple platforms

Skills

Experience in the design, development, testing and integration of high complex software solutions leveraging change management processes

Experience in software development using Java with Spring and RESTful APIs (7+ years)

Experience in Javascript, especially Typescript (7+ years)

Experience working in an Agile Environment (4 – 7 years)

Experience with AWS services and cloud development (3+ years)

Experience mentoring junior software engineers on the team.

Experience with Test Driven Development across multiple platforms

Experience with Paired Programming

Proficient in interpersonal communication, collaboration and building working relationships

Understanding of security frameworks, authentication and authorization scheme

Education:

Bachelor’s degree and/or equivalent experience

TekWissen Group is an equal opportunity employer supporting workforce diversity.

TekWissen

Read More

Research and Development – New Engineer Development Program

Who We Are

Vermeer equips customers doing important work around the world. We are global, driven by innovation and growing. The equipment we make manages natural resources, connects people and feeds and fuels communities. We live out a caring culture, we demonstrate agility, we keep a focus on customers and are stewards of our resources. These beliefs drive our culture, determine how we treat others and steer our business.

Job Summary

Work Shift 1 – First Shift

Are you a disruptive innovator who is passionate about applying new technology to real world customer needs? In this role, you will analyze, innovate, design, develop and test proof of concepts for stakeholder evaluation. We’re looking for someone who thrives in a fast paced, hands-on team who can use their creativity to solve customer articulated and unarticulated needs.

Participants in the Engineering Development Program will complete a 15-20 week training experience that provides an overview of engineering and manufacturing processes at Vermeer. During this program, participants will complete experiential, hands-on, classroom, and self-paced educational opportunities to accelerate their professional development. Upon successful completion of the program, participants will be assigned to a Research and Development Engineer role as described below

What You’ll Do

1. Innovate and design profitable solutions for the agricultural and construction industry.

2. Determine the articulated and unarticulated needs of global customers through research and observation.

3. Create and evaluate proof of concepts to validate the idea for further evaluation by the stakeholders. Demonstrate to team members, customers or dealers the product needs to better define the product.

4. Fosters dealer or stakeholder relationships to research unidentified needs and to perform validation.

What We’re Looking For

– Four year college degree in Agricultural, Computer, Electrical, Industrial or Mechanical.

– Proficient in Solidworks or equivalent CAD tool.

– Proficient in C++, Python and Mathlab preferred.

– Proficient in Design of Experiment preferred.

– Proficient in gathering and evaluating data logs.

– Familiarity with robotics, perception sensors and control system theory.

– Ability to design, test, and implement Human-Machine Interface and Virtual Instrument components and controls.

– Ability to understand needs of customer and incorporate into function of machine.

– Ability to analyze, develop and write specifications that direct software code development.

– Knowledge in the areas of electronic circuits, microcontroller architectures, and principles of operation.

– Ability to communicate timely and effectively, both orally and in written documents.

– Ability to prioritize multiple tasks while maintaining a high level of attention to detail.

Travel

– Occasional travel is expected of this position.

Work Location HYBRID: Some of a team member’s day-to-day work may be best done at a location other than a Vermeer campus. Discuss specific arrangements with your manager.

Equal Opportunity Employer

At Vermeer Corporation, we believe in the value of your unique identity, background, and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity, veteran status or any other status protected by the law. Applicants requiring a reasonable accommodation due to a disability at any stage of the employment application process should contact Team Member Solutions at (641) 621-8767 or at .

Interested? We’d love to get to know you.

Vermeer Corporation

Read More

Marketer

At Leaf Home, people are at the heart of everything we do, and we’ve crafted a team of the very best to ensure we make a difference. Our brands, including LeafFilter Gutter Protection, Leaf Home Water Solutions, Leaf Home Safety Solutions, and Leaf Home Enhancements, invest in our commitment to make each home safer and more livable. In addition to serving our customers, Leaf Home strives to build a welcoming and inclusive workplace. We are proud to be a certified Great Place to Work® as well as a multi-recipient of Top Workplaces. From free benefits to people-focused committees like the Women’s Committee, Diversity & Inclusion Committee, and VetConnect, we are dedicated to making Leaf Home a great place to work every day… because who doesn’t want a job they can look forward to? Come grow your career with us!

Big company with a family-owned feel – YOU are important to us, and we’ve built a culture you’ll love.

Recognized as a top Ohio and US workplace by The Plain Dealer, Energage, and Great Place to Work®.

Job security – we have locations throughout the U.S. and Canada, and we’re not done growing!

Inclusion, sustainability, and reliability are at the core of our culture

Veterans’ resources available to help transitioning service members find a new rhythm.

Dedicated to providing resources and encouragement for employee growth

Position Summary:

The Event Marketer will represent the LeafFilter brand through face-to-face interaction with prospective customers by attending a variety of pre-scheduled events throughout a designated territory. The purpose of this position is to build brand awareness and transform that awareness into a sales lead.

Essential Duties and Responsibilities:

Attend consumer facing shows to include but not limited to home shows, fairs, festivals, and community events.

Interact with event attendees, provide an informative product demonstration, and generate sales leads.

Overcome objections by utilizing proven, industry leading sales techniques and training resources.

Transport, assemble and disassemble lightweight display equipment and marketing collateral.

Submit sales lead at the conclusion of each shift.

Responsible for meeting predetermined performance goals for each event as well as other KPIs

Must hold a valid driver’s license.

Performs other duties as assigned by supervisor.

Experience and Minimum Qualifications:

High School Diploma or equivalent.

Ability to actively listen and rebut objections and/or answer questions regarding the performance or quality of the product

Must have a smart phone to use timekeeping application and submit leads

Must have access to reliable transportation for every scheduled shift.

Ability to juggle various work activities and shift their attention from one task to another to meet the demands of different stakeholders without “dropping the ball”.

Ability to stand for extended periods of time

Must be outgoing, friendly, and energetic

Ability to engage attendees, obtain their interest and present a quick product demonstration

Ability to work weekends and evenings

Ability to thrive in a fast-paced, high-energy, team-oriented environment and have a “roll up your sleeves” and “today not tomorrow” mentality.

Apply active listening skills through the ability to comprehend information presented and respond thoughtfully.

Detail-oriented and can focus on the task at hand, no matter how minute, by finding the most efficient and effective pathway to completion.

Excellent verbal and written communication skills are required for communicating with internal and external parties in a manner that is both articulate and professional.

Ability to logically connect ideas, scrutinize and evaluate arguments, find inconsistencies and errors in work, solve complex problems, and engage in reflection.

Ability to provide timely and empathetic help through in-person, phone, email, and social media avenues that keeps the co-worker or customer’s needs at the forefront of every interaction.

Ability to communicate effectively, to recognize, understand, and manage one’s own emotions as well as others, and foster positive working relationships across all levels of the organization.

Holding oneself responsible and being self-driven in accomplishing business goals, adhering to policies and being responsible for one’s own actions, performance, and decisions.

Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).

Preferred Knowledge, Skills, Abilities or Certifications:

Prior experience in the home improvement industry

Experience in customer service and/or sales

Travel Requirements:

Occasional overnight travel required.

Overtime/Additional Hours Requirements:

No overtime required.

Physical Requirements

Normal Office Environment

Performs indoor work in a climate-controlled environment and outside work in varying temperatures and climates.

Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.

Are We Your Company?

Focused On Growth Leaf Home is dominating the home improvement industry as we continue to grow. We work hard and play harder. For us, we strive to be better than the best and we want you to join in our success! With offices across the U.S. and Canada, our team is diverse and strong. From marketing to sales, installation, and service, we have the best team, right along with the best home solutions. We are committed to our employees’ growth, which we demonstrate by:

Innovating, Always: Leaf is focused on providing cutting edge solutions, both for employees and customers

Partnering With Our Customers: Building strong and trusted relationships is at the core of everything we do

Empowering Employees: Our brand begins and ends with our people, and we provide opportunities for growth and success in a supportive environment

Supporting Our Communities: Home is where the heart is, and we in turn strive to give back to the communities that our customers and employees call home

What do we offer?

Industry-leading compensation package

Paid Time Off, Comprehensive Health, Wellbeing, and Financial Wellness Programs

Childcare benefits to support families

Endless opportunity for growth and advancement. Just ask our current employees!

Other perks you need to know about:

Employee assistance program – get 24/7 support in areas including legal, financial planning, and counseling.

Employee discount marketplace – enjoy discounts on thousands of products, from cars to local attractions.

Gym membership compensation – your insurance will help cover the cost of your gym membership!

Groups like Vet Connect & the Women’s Committee to help you get involved and to provide resources for your success

Leaf Home Awards and Accolades: Leaf Home has been recognized as a top workplace by The Plain Dealer, is a multi-year recipient of Top Workplaces USA by Energage, and has been Certified™ by Great Place to Work®. A few of our brands have also earned accolades, including:

LeafFilter and Leaf Home Safety Solutions have ranked on the annual Remodeling 550 list

Leaf Home, LeafFilter, and Leaf Home Safety Solutions have been recognized on Qualified Remodeler magazine’s Top 500 list

Leaf Home is a Smart Culture Awards honoree for its employee-focused culture

Leaf Home is recognized as a growth leader on both the Inc. 5000 and Inc. 5000 Regionals: Midwest lists

For a full list of awards earned by our brands, please visit .

Diversity and Inclusion Statement

Leaf Home Solutions is committed to creating a diverse environment and is proud to be an equal opportunity employer. We strive to create an environment that embraces differences and fosters inclusion.

Equal Opportunity Statement

Leaf Home Solutions will recruit, hire, train, and promote persons in all job titles without regard to race, color, ancestry, national origin, gender identity or expression, sexual orientation, marital status, religion, age, results of genetic testing, veteran status, or physical/mental disability (except where the disability prevents the individual from being able to perform the essential functions of the job and cannot be reasonably accommodated in full compliance with the law).

Leaf Home

Read More

Translate »
Scroll to Top